Light Sensor Wiring Harness Kit with Fuse Relay ON/Off Switch for LED Off-Road Driving Light Work Light

ÿ

This automatic light sensor wiring harness needs to use together with the light bar harness (for one light or two). It cannot work alone.

Acc wiring length: 3 Meters
Connector lugs wiring length: 0.9 Meters
Light sensor probe: 0.9 Meter
Wire Diameter: 4.2mm
Light sensor value: 300LX
Can be used to match the wiring loom harness kit with fuse and relay.

Automobile automatic induction lamps receiver head should be installed between the front windows of the cockpit and center console connection, and make sure no any obstructions blocking the light.
Automatic induction lamp control button should be installed near the driver,where the driver can easily touch.

The ACC control line of the automatic sensing light shall be connected to the ACC safety sheet in the front engine compartment and the main safe box by the driving cabin,when the ACC is not connected, the automatic sensing function will not start.

Instruction for Use:
1.The manual button of control box is for controlling on and off of the LED light manually. When you press the manual button, the red indicator light will be on and manual mode starts. At the same time, the green indicator light will be on and the LED light turns on.
2.When you press the manual button again, the green indicator light will be off as well as the LED light.
3.Under the manual mode, the red indicator light is always on.
4.The automatic button of control box is for controlling on and off of the LED light automatically. When you press the automatic button, the blue indicator light will be on and automatic mode starts.
5.Under the automatic mode, the light sensor will automatically turn on and turn off the LED light according to the surrounding environment. When it?s dark around, the LED light turns on automatically and green indicator light will be on. When it?s bright around, the LED light turns off and green indicator light will be off.
6.The automatic system will turn on the LED light in 0.1s when it?s dark around and will turn off the LED light within 10s.
7.Under the automatic mode, the blue indicator light is always on.
8.Only when connecting with ACC signal wire, the automatic induction system works.

ÿ